UniFormation S10: 16K resin 3D printer with automatic cleaning, starting at $999

UniFormation S10: 16K resin 3D printer with automatic cleaning, starting at $999

Germany,October 16, 2026,Published by 3Druck.com--3Druck.com highlights the UniFormation S10's 16K printing technology and integrated automated workflow, exploring how its printing, washing, and drying capabilities bring greater convenience and efficiency to desktop resin 3D printing.

The 16K desktop resin 3D printer combines printing, washing, and drying in a single device. Optionally, solvent management for multiple printers can also be automated.

Resin 3D printers can produce highly detailed models, but the work is usually not finished once the print is complete. The models still need to be transported, washed, and dried before the support structures can be removed and the parts can be post-cured under UV light. For makers and small studios, these steps mean additional manual effort, extra equipment, and interruptions in the workflow.

UniFormation aims to close this gap with the S10. The desktop resin 3D printer combines printing, draining excess resin, washing, and hot-air drying in a closed system. The Kickstarter campaign is set to launch on October 22, 2026. Prices start at $999.

One device, fewer manual steps

The S10’s automated process begins immediately after printing is complete. The build platform rotates and tilts so that excess resin can flow back into the resin tank. A movable cover protects the resin tank while the platform is transported to the washing area. There, the models undergo two wash cycles with controlled lateral movements. The cleaning fluid is then allowed to drain from the platform before the models are dried with warm air at 35 to 45 °C.

Throughout the entire process, the printed objects remain attached to the build platform. Users do not need to transport the resin-coated models to a separate washing station or return to the printer to start the drying process. For example, someone printing a series of miniatures can focus on other tasks in the meantime, while the device automatically performs the intermediate post-processing steps.

 

This distinction is important: The S10 automates the printing process, washing, and drying—but not all post-processing steps. The models still need to be removed from the build platform, stripped of their support structures, and finally post-cured under UV light. For complex hollow objects, additional drying of the interior may also be necessary after the support structures are removed. This depends on the shape of the cavities and the drainage holes present.

16K printing with built-in assistance features

The S10 uses a monochrome 16K LCD with a resolution of 15,360 × 6,540 pixels, pixel dimensions of 14.52 × 19.25 micrometers, and a build volume of 223.03 × 125.9 × 200 mm. According to the manufacturer, a C5-grade ball screw enables a repeatability of ±0.005 mm for Z-axis positioning. Foreign object detection and a supported peeling system are designed to help reduce printing issues.

An automatic resin feed and resin heater, factory pre-leveling, and app-based monitoring are designed to reduce the effort required for routine setup and monitoring. For users who wish to continue using their existing post-processing equipment, a print-only mode is available. The enclosed housing and integrated air filtration can help reduce odors. However, proper ventilation and safe handling of the resin remain essential.

In automated cleaning, the geometry of the models plays just as important a role as the printer’s build volume dimensions. Large or hollow printed objects can displace varying amounts of cleaning fluid. Drain holes must allow the solvent to enter the interior spaces and then drain out again. UniFormation states that it will continue to optimize the movement speeds and safety features for monitoring the liquid level as part of the ongoing beta testing before production begins.

Extending the workflow beyond a single printer

UniFormation is also developing a networked workflow centered around the UniGalix model library and the UniFormation Studio slicer. The goal is to integrate model search, print preparation, and the transmission of print jobs over the network. These software features are intended to complement the hardware system and are not a prerequisite for the integrated automatic washing and drying system.

For studios, the optional S10 Fluid Hub supports up to three printers, with two devices able to wash simultaneously. The system separates an initial rough cleaning from a subsequent wash cycle using cleaner solvent. Once the solvent used in the final cleaning step becomes too contaminated, it can be reused for the initial cleaning step instead of being discarded. Fresh solvent is then used for the final wash cycle.

This phased reuse can reduce isopropanol (IPA) consumption and ongoing operating costs. The Fluid Hub's liquid level control also offers greater flexibility within the system's limits when cleaning larger-volume printed objects.

An optional post-curing module with touchscreen controls rounds out the range of accessories. However, UV post-curing remains a separate step that the user must initiate after removing the parts and support structures.

Kickstarter Pricing and Availability

The S10 is set to launch on Kickstarter on October 22 at a starting price of $999. The planned retail price is $1,299.

As part of UniFormation's VIP reservation program, eligible customers who pay a refundable deposit of $20 and then back the Kickstarter tier for $999 can receive $100 in cashback once the campaign ends.

Since the down payment is refunded separately, the effective price of the printer is $899. However, this is not a Kickstarter price of $899 that is paid directly upon backing the project.

The first shipments are expected in March 2027, subject to production progress and order fulfillment. Interested parties can sign up for a notification about the campaign launch via the Kickstarter preview page to request a notification when the campaign launches. On the official S10 product page from UniFormation, you’ll find more information about the VIP program’s terms and conditions, refund policy, and shipping details.

About UniFormation

Founded in 2016, UniFormation develops UV resin 3D printers and solutions for the printing workflow. With its GK Series devices, the company has established its line of desktop printers. The S10 expands the manufacturer’s focus on integrated automation.