UniFormation GK3 Pro

Choose the GK3 Pro if your priority is high-detail work within a 211 × 118 × 240 mm build volume—especially transparent parts, jewelry, dental applications, engineering prototypes, art models, or professional small-batch production. Choose the GK3 Ultra instead when large model size or the number of parts per plate matters more than the finer XY pixel size and 385 nm workflow.

Both models offer a 211 × 118 × 240 mm build volume, but they are designed for different priorities. The GK3T is the more accessible 405 nm option for general models and hobby use. The GK3 Pro uses a 385 nm light source, high-transmission screen, ball-screw Z-axis, and professional workflow features for users who place greater value on fine structures, transparent parts, and long-term mechanical stability.If you do not need the Pro-specific optical and motion system, the GK3T may provide better value for general printing.

The 385 nm system is designed to support more controlled curing for fine structures and compatible transparent or professional resins. Combined with the high-transmission screen and 14 × 19 μm pixel size, it gives the GK3 Pro a clear application focus beyond simply being a 16K printer.The final result still depends on resin chemistry, exposure, orientation, support design, washing, curing, and any polishing or coating used after printing.

No resin printer produces optically clear results from wavelength alone. The GK3 Pro provides a strong platform for compatible transparent-resin workflows, but clarity also depends on resin selection, exposure, wall thickness, washing, post-curing, surface finishing, and coating.Use a validated transparent-resin profile and test the complete workflow before producing final customer parts.

The maximum print volume is 211 × 118 × 240 mm. The 16K screen has a resolution of 15,120 × 6,230 pixels and an XY pixel size of approximately 14 × 19 μm.Pixel size is only one part of print quality. Mechanical stability, light uniformity, resin behavior, calibration, orientation, and post-processing also affect the final part.

Yes. The GK3 Pro includes resin heating with 25°C and 30°C settings and an automatic resin feeding workflow. Heating can reduce temperature-related variation in cooler spaces, while automatic feeding can reduce manual resin checks during longer prints.Always test both systems before an unattended or high-value print and keep the resin within the marked operating range.

The machine is factory calibrated, so setup is intended to be straightforward. You should still inspect the printer after transport, confirm the vat and build plate are seated correctly, check leveling with the official method, update to the correct firmware, and run a small exposure and adhesion test.This short acceptance check is less expensive than discovering a setup issue during a full production plate.

The GK3 Pro supports UniFormation Slicer, CHITUBOX, and Lychee Slicer. Files can be transferred by USB, Wi-Fi, or wired network.Direct transfer, camera, app, and monitoring availability may depend on operating system, slicer, app release, and firmware version. Check the current compatibility guide before purchase if remote monitoring is essential to your workflow.

Confirm that the printer is running the correct firmware, then check the current software and operating-system compatibility information. For Wi-Fi issues, verify the adapter, USB port, network signal, and refreshed network list.You can use USB as a direct file-transfer method while a network issue is being diagnosed. Contact technical support with the firmware version, operating system, slicer, network setup, and a clear description of the failure.

The GK3 Pro is designed for compatible 385 nm transparent, standard, water-washable, ABS-like, and other professional resin workflows. Do not assume that every 405 nm profile will transfer directly to a 385 nm setup.Use a resin profile that has been tested for the GK3 Pro or perform a controlled exposure calibration before printing final parts.

For a complete workflow, the GK3 Pro can be paired with W230 and Cure3. A printer-only configuration is more appropriate if you already own washing and curing equipment with enough internal capacity for your parts.Match the curing wavelength and process to the resin manufacturer's instructions, especially for transparent, dental, jewelry, or engineering materials.

The GK3 Pro product page currently lists a one-year machine warranty and a 14-day return and exchange period. Covered components, consumables, exclusions, return costs, and regional eligibility are defined by the current policies.The listed local-delivery estimate applies when inventory is available in the selected region. Confirm the current warehouse status and expected dispatch window before ordering.