From automated post-processing for models up to 200mm tall to improved cleaning for hollow prints, smarter liquid management, and multi-printer connectivity, UniFormation S10 continues to evolve through ongoing firmware updates—delivering a more stable, reliable, and refined automated resin 3D printing experience.
The true value of a fully automated resin 3D printer goes beyond simply reducing manual work. It lies in making every stage of the process—from printing and resin draining to washing, liquid drainage, and drying—work together seamlessly.
For a resin 3D printer designed for everyday creators, professional studios, and production environments, users care about more than just how many steps can be automated. They also want to know whether those processes can run reliably and deliver consistent results across models of different sizes and structures.
Since the launch of UniFormation S10, we have been closely monitoring real-world user feedback and continuously refining the machine through practical testing and engineering improvements.
The latest updates, S10 Firmware Versions 1.0.29 and 1.0.32, represent another important step in this ongoing development. These updates address several areas that matter most to users, including large-model post-processing, resin and cleaning-fluid management, hollow-model cleaning, system stability, and multi-printer connectivity.
These improvements are more than just new features. They reflect our ongoing commitment to making fully automated resin 3D printing more practical, dependable, and user-friendly.
1. Automated Post-Processing for Models Up to 200mm Tall
For resin 3D printing enthusiasts, models come in all shapes and sizes. Miniatures, intricate mechanical components, and larger-scale models all bring different post-processing requirements.
If a fully automated resin 3D printer can only handle models within a limited height range, users may still need to step in and manually handle certain prints after printing is complete. This creates interruptions in what should be a seamless automated workflow.
To address this limitation, S10 Firmware 1.0.29 optimizes the motion-control logic to support fully automated post-processing for models up to 200mm tall.

From draining excess resin after printing to automatic washing, cleaning-fluid drainage, and final hot-air drying, S10 can now carry out the entire post-processing sequence according to its programmed workflow, reducing the need for manual intervention across a wider range of model sizes.
We have also refined the motion paths for models of different heights.
For models between 31mm and 110mm tall, we adjusted the resin-draining angles and cleaning-fluid discharge paths. These improvements help reduce the likelihood of liquid dripping onto unintended areas outside the designated resin collection or cleaning zones during certain movements.
For smaller models up to 30mm tall, S10 now uses a dedicated resin-draining sequence. Instead of performing a full 180° rotation, the model rotates to 90° and remains in position for three minutes before the R-axis returns to 0°. This provides a more suitable draining approach for smaller prints.
From compact miniatures to larger models up to 200mm tall, S10 continues to expand its automated post-processing capabilities to accommodate different printing needs.
2. A Cleaner Automated Workflow: Less Dripping, Less Splashing, and Better Liquid Drainage
Liquid management is one of the most important aspects of automated resin 3D printing.
Whether it involves recovering excess resin after printing or draining cleaning fluid after washing, an improperly optimized motion path or process sequence can lead to resin dripping outside the collection area, cleaning fluid splashing onto the wash-station lid, or residual liquid dripping again during the drying process.
We take these everyday usability details seriously.
In Firmware 1.0.29, we first optimized the resin-draining paths to improve liquid return under different model heights and rotation angles. The goal is to help excess resin flow back into the designated collection area more effectively.
We also addressed situations where a small amount of cleaning fluid remains on the model after washing.
To give residual liquid more time to drain, we adjusted the wash-station lid's operating sequence. After washing is complete, the lid waits an additional 30 seconds in its left-side position before moving right to close and initiate the heating and drying process.
This additional drainage time helps reduce liquid dripping onto the wash-station lid. The integrated drainage channel on the wash station provides another layer of liquid management, helping guide residual fluid and prevent unwanted accumulation.
Improved Cleaning for Hollow Models
Liquid management becomes even more challenging when cleaning hollow resin prints.
Because hollow models contain internal cavities, cleaning fluid can become trapped inside areas that are difficult to reach or drain. Even when the exterior appears clean, residual fluid may remain inside and potentially drip out again during subsequent drying.
To address this, Firmware 1.0.29 extended the liquid-draining time during the model's 0° to 270° rotation sequence to approximately 1.5 minutes. This gives residual cleaning fluid more time to escape from internal cavities.
Building on this improvement, Firmware 1.0.32 introduces a second cleaning-fluid drainage cycle.
By adding another dedicated drainage sequence, S10 provides additional time for residual fluid to leave hollow structures, helping reduce liquid buildup inside models and minimizing the possibility of cleaning fluid dripping back into the resin vat during drying.
This improvement reflects our commitment to going beyond the initial optimization. We continue to refine the workflow based on the challenges users may encounter in real-world printing scenarios.
We also addressed cleaning-fluid overflow by adjusting the maximum liquid capacity limits for automated washing:
-
550ml for standalone S10 operation.
-
800ml when using S10 with Fluid Hub.
These limits help keep the automated washing process within a more appropriate liquid capacity range.
Our goal is not simply to automate washing and drying, but to deliver a more refined workflow with better control over how resin and cleaning fluid move through every stage of post-processing.
3. More Than Automation: Improving System Stability and Motion Control
One of the biggest advantages of an automated machine is the ability to minimize unnecessary manual intervention.
However, frequent feeding interruptions, motion resonance, washing errors, or incorrect system-state detection can undermine the entire experience, even when all the automated functions are available.
That is why both firmware updates include several improvements focused on operational stability.
For automatic resin feeding, we fixed an intermittent issue where the system could occasionally fail to replenish resin when the vat's resin level became too low during printing. This further improves the reliability of the automatic feeding system.
During the washing process, we added a 150ms pause to the X1-axis movement to help reduce machine resonance and make the washing sequence run more smoothly.
We also increased the X2-axis movement speed to improve operation when the wash-station lid is not properly installed, helping address potential movement interruptions and unintended homing protection triggers.
For file management, Firmware 1.0.32 introduces an intelligent file verification mechanism. When a file's hash value remains unchanged, the system performs a full verification during the initial check. Subsequent recognition of the same file can then use a faster verification process, reducing unnecessary repeated waiting time.
While these adjustments may seem small individually, they collectively contribute to a better long-term user experience.
We are not just focused on whether S10 can complete an automated task once. We want every task to run more smoothly and reliably.
4. From Single-Printer Operation to Multi-Printer Connectivity
For individual creators, one printer may be enough to handle most printing projects.
However, for professional model-making studios, experienced creators, and small print farms, connecting multiple printers and improving overall production efficiency can make a significant difference.
S10's Fluid Hub has also received further connectivity improvements through the latest firmware updates. It supports connections with multiple S10 printers, providing more flexible configurations for different working environments.
In addition, Firmware 1.0.32 further improves communication stability between devices to address potential communication-state misidentification when multiple printers share the same washing station.
These improvements help reduce the likelihood of washing interruptions or unexpected errors caused by communication issues.
This means S10's automated workflow is no longer limited to individual printer setups. It can also support more flexible multi-printer environments.
From individual creative projects to professional studio workflows, we want S10 to adapt to an increasingly diverse range of printing needs.
5. Automation Should Never Come at the Expense of Safety
As automation becomes more advanced, the motion systems and operating sequences also become more sophisticated.
That is why operational safety is just as important as automation efficiency and system stability.
In Firmware 1.0.29, S10 introduced a collision detection and protection mechanism.
When the machine encounters a collision involving its moving components due to an incorrect operation or an abnormal condition, the system can automatically stop the current task. This helps prevent continued movement from potentially causing further equipment damage and reduces associated operational risks.
This feature adds another layer of protection to the automated workflow and reflects our focus on building safer, more dependable automated equipment.
We believe users should be able to enjoy the convenience of automation with greater confidence and peace of mind.
6. Continuous Improvement Beyond Every Firmware Update
From supporting automated post-processing for models up to 200mm tall to introducing a second drainage cycle for hollow prints, from refining resin and cleaning-fluid movement paths to improving multi-printer communication and adding collision protection, every improvement shares one common goal:
To make UniFormation S10 a more reliable, practical, and continuously improving fully automated resin 3D printer.
We understand that a truly great automated printing experience is not simply about combining multiple features into one machine. It requires continuously refining every detail and addressing the real challenges users encounter during everyday operation.
That is why our work on S10 does not end with its product launch.
We will continue listening to user feedback, conducting real-world testing, and making engineering improvements across motion control, liquid management, automated post-processing, and overall system stability.
To every S10 owner and member of our community, thank you for your continued support and feedback. Every question you raise and every experience you share helps us make S10 better.
Your Feedback Drives Our Progress.
Better Automation. Better Experience. Always Improving.
