Wash & Cure FAQ
Recommended cleaning solvents for the W230 ultrasonic cleaning machine
The W230 cleaning machine is recommended for use with a 95% alcohol or IPA concentration. A 75% concentration is also acceptable, but the cleaning effect is not as good. Do not use other brands of specialized resin cleaner because it may corrode the sponge cover plate, which can lead to the coating coming off and corrosion of the seals, leading to leakage.
Recommended cleaning time for W230 ultrasonic cleaner
If you are using the W230 ultrasonic cleaner to clean general models, the default setting of three minutes is usually sufficient. cleaning for too long may lead to softening of the model.
There are white marks on the surface of the model after curing, or there is still a sticky feeling after curing.
This is usually caused by the model not being completely cleaned before curing. The model needs to be thoroughly cleaned and air-dried before curing to avoid such a situation.
The C3U and C3 curing machines do not light up when the start button is pressed
These machines have a heating function. They operate by heating the interior for a set period of time. When heating is complete, the curing lamps light up. However, the LED boards do not work during this heating period.
To skip the heating step and use the curing function directly, just set the heating time to 0 minutes.